USA MADE! BILLET Cummins/Saginaw power steering mount and gear kit! 12/24v

Description

MADE IN THE USA, IN HOUSE AT OUR SHOP IN BILLINGS, MONTANA! 6061 T6 billet Saginaw power steering pump mount kit for Cummins 4bt,6bt,12/24 valve. Utilizes any standard threaded shaft gm style Saginaw power steering pump, available nearly anywhere for less than . Kit includes billet mount, Brand NEW Billet Steel Hardened and zinc Plated keyed drive gear, bolts to attach pump to bracket, new power steering reservoir cap,nut and washer for pump shaft, and all needed seals and gaskets, as well as instructions and part numbers for pump. Our kit uses a keyed shaft pump featuring 100% shaft to gear engagement and no slippage!  The gear on our kit is also being retained by a nut so there is virtually NO risk of the gear walking off the shaft and causing catastrophic engine damage. This kit is perfect for swaps where you want to get rid of the troublesome vacuum pump setup, or just to simplify your build. These kits are engineered to perform, and will most likely outlast whatever you put it on! We have refined this part so there is no need to trim or clearance the pump casting or anything else, just assemble parts per instructions provided, bolt up, fill, bleed pump, and go!  PLEASE NOTE: if using this with hydroboost you will need to install a "t" fitting in return line to pump for both your return lines back into one (less than part at a home improvement store) unless you are using a 2 return reservoir.    FREE SHIPPING IN THE CONTINENTAL USA!      **PUMP NOT INCLUDED!! THIS IS FOR THE BILLET BRACKET, GEAR AND HARDWARE ONLY** PLEASE NOTE THIS KIT DOES NOT FIT COMMONRAIL ENGINES